#
# nsd.conf -- the NSD(8) configuration file, nsd.conf(5).
#
# Copyright (c) 2001-2011, NLnet Labs. All rights reserved.
#
# See LICENSE for the license.
#

# This is a comment.
# Sample configuration file
# include: "file" # include that file's text over here.  Globbed, "*.conf"

# options for the nsd server
server:
	# Number of NSD servers to fork.  Put the number of CPUs to use here.
	# server-count: 1

	# uncomment to specify specific interfaces to bind (default are the
	# wildcard interfaces 0.0.0.0 and ::0).
	# For servers with multiple IP addresses, list them one by one,
	# or the source address of replies could be wrong.
	# Use ip-transparent to be able to list addresses that turn on later.
	# ip-address: 1.2.3.4
	# ip-address: 1.2.3.4@5678
	# ip-address: 12fe::8ef0

	# Allow binding to non local addresses. Default no.
	# ip-transparent: no

	# Allow binding to addresses that are down.  Default no.
	# ip-freebind: no

	# use the reuseport socket option for performance. Default no.
	# reuseport: no

	# enable debug mode, does not fork daemon process into the background.
	# debug-mode: no

	# listen on IPv4 connections
	# do-ip4: yes

	# listen on IPv6 connections
	# do-ip6: yes

	# port to answer queries on. default is 53.
	# port: 53

	# Verbosity level.
	# verbosity: 0

	# After binding socket, drop user privileges.
	# can be a username, id or id.gid.
	# username: @user@

	# Run NSD in a chroot-jail.
	# make sure to have pidfile and database reachable from there.
	# by default, no chroot-jail is used.
	# chroot: "@configdir@"

	# The directory for zonefile: files.  The daemon chdirs here.
	# zonesdir: "@zonesdir@"
	
	# the list of dynamically added zones.
	# zonelistfile: "@zonelistfile@"

	# the database to use
	# if set to "" then no disk-database is used, less memory usage.
	# database: "@dbfile@"

	# log messages to file. Default to stderr and syslog (with
	# facility LOG_DAEMON).  stderr disappears when daemon goes to bg.
	# logfile: "@logfile@"

	# File to store pid for nsd in.
	# pidfile: "@pidfile@"

	# The file where secondary zone refresh and expire timeouts are kept.
	# If you delete this file, all secondary zones are forced to be 
	# 'refreshing' (as if nsd got a notify).  Set to "" to disable.
	# xfrdfile: "@xfrdfile@"

	# The directory where zone transfers are stored, in a subdir of it.
	# xfrdir: "@xfrdir@"

	# don't answer VERSION.BIND and VERSION.SERVER CHAOS class queries
	# hide-version: no

	# version string the server responds with for chaos queries.
	# default is 'NSD x.y.z' with the server's version number.
	# version: "NSD"

	# identify the server (CH TXT ID.SERVER entry).
	# identity: "unidentified server"

	# NSID identity (hex string, or "ascii_somestring"). default disabled.
	# nsid: "aabbccdd"

	# Maximum number of concurrent TCP connections per server.
	# tcp-count: 100

	# Maximum number of queries served on a single TCP connection.
	# By default 0, which means no maximum.
	# tcp-query-count: 0

	# Override the default (120 seconds) TCP timeout.
	# tcp-timeout: 120

	# Maximum segment size (MSS) of TCP socket on which the server
	# responds to queries. Default is 0, system default MSS.
	# tcp-mss: 0

	# Maximum segment size (MSS) of TCP socket for outgoing AXFR request.
	# Default is 0, system default MSS.
	# outgoing-tcp-mss: 0

	# Preferred EDNS buffer size for IPv4.
	# ipv4-edns-size: 4096

	# Preferred EDNS buffer size for IPv6.
	# ipv6-edns-size: 4096

	# statistics are produced every number of seconds. Prints to log.
	# Default is 0, meaning no statistics are produced.
	# statistics: 3600

	# Number of seconds between reloads triggered by xfrd.
	# xfrd-reload-timeout: 1
	
	# log timestamp in ascii (y-m-d h:m:s.msec), yes is default.
	# log-time-ascii: yes

	# round robin rotation of records in the answer.
	# round-robin: no

	# minimal-responses only emits extra data for referrals.
	# minimal-responses: no

	# refuse queries of type ANY.  For stopping floods.
	# refuse-any: no

	# check mtime of all zone files on start and sighup
	# zonefiles-check: yes
	
	# write changed zonefiles to disk, every N seconds.
	# default is 0(disabled) or 3600(if database is "").
	# zonefiles-write: 3600

	# RRLconfig
	# Response Rate Limiting, size of the hashtable. Default 1000000.
	# rrl-size: 1000000

	# Response Rate Limiting, maximum QPS allowed (from one query source).
	# If set to 0, ratelimiting is disabled. Also set
	# rrl-whitelist-ratelimit to 0 to disable ratelimit processing.
	# Default is @ratelimit_default@.
	# rrl-ratelimit: 200

	# Response Rate Limiting, number of packets to discard before
	# sending a SLIP response (a truncated one, allowing an honest
	# resolver to retry with TCP). Default is 2 (one half of the
	# queries will receive a SLIP response, 0 disables SLIP (all
	# packets are discarded), 1 means every request will get a
	# SLIP response.  When the ratelimit is hit the traffic is
	# divided by the rrl-slip value.
	# rrl-slip: 2

	# Response Rate Limiting, IPv4 prefix length. Addresses are
	# grouped by netblock. 
	# rrl-ipv4-prefix-length: 24

	# Response Rate Limiting, IPv6 prefix length. Addresses are
	# grouped by netblock. 
	# rrl-ipv6-prefix-length: 64

	# Response Rate Limiting, maximum QPS allowed (from one query source)
	# for whitelisted types. Default is @ratelimit_default@.
	# rrl-whitelist-ratelimit: 2000
	# RRLend

# DNSTAP config section, if compiled with that
# dnstap:
	# set this to yes and set one or more of dnstap-log-..-messages to yes.
	# dnstap-enable: no
	# dnstap-socket-path: "/var/run/dnstap.sock"
	# dnstap-send-identity: no
	# dnstap-send-version: no
	# dnstap-identity: ""
	# dnstap-version: ""
	# dnstap-log-auth-query-messages: no
	# dnstap-log-auth-response-messages: no

# Remote control config section. 
remote-control:
	# Enable remote control with nsd-control(8) here.
	# set up the keys and certificates with nsd-control-setup.
	# control-enable: no

	# what interfaces are listened to for control, default is on localhost.
	# with an absolute path, a unix local named pipe is used for control
	# (and key and cert files are not needed, use directory permissions).
	# control-interface: 127.0.0.1
	# control-interface: ::1

	# port number for remote control operations (uses TLS over TCP).
	# control-port: 8952

	# nsd server key file for remote control.
	# server-key-file: "@configdir@/nsd_server.key"

	# nsd server certificate file for remote control.
	# server-cert-file: "@configdir@/nsd_server.pem"

	# nsd-control key file.
	# control-key-file: "@configdir@/nsd_control.key"

	# nsd-control certificate file.
	# control-cert-file: "@configdir@/nsd_control.pem"


# Secret keys for TSIGs that secure zone transfers.
# You could include: "secret.keys" and put the 'key:' statements in there,
# and give that file special access control permissions.
#
# key:
	# The key name is sent to the other party, it must be the same
	#name: "keyname"
	# algorithm hmac-md5, or sha1, sha256, sha224, sha384, sha512
	#algorithm: sha256
	# secret material, must be the same as the other party uses.
	# base64 encoded random number.
	# e.g. from dd if=/dev/random of=/dev/stdout count=1 bs=32 | base64
	#secret: "K2tf3TRjvQkVCmJF3/Z9vA=="


# Patterns have zone configuration and they are shared by one or more zones.
# 
# pattern:
	# name by which the pattern is referred to
	#name: "myzones"
	# the zonefile for the zones that use this pattern.
	# if relative then from the zonesdir (inside the chroot).
	# the name is processed: %s - zone name (as appears in zone:name).
	# %1 - first character of zone name, %2 second, %3 third.
	# %z - topleveldomain label of zone, %y, %x next labels in name.
	# if label or character does not exist you get a dot '.'.
	# for example "%s.zone" or "zones/%1/%2/%3/%s" or "secondary/%z/%s"
	#zonefile: "%s.zone"
	
	# If no master and slave access control elements are provided,
	# this zone will not be served to/from other servers.

	# A master zone needs notify: and provide-xfr: lists.  A slave
	# may also allow zone transfer (for debug or other secondaries).
	# notify these slaves when the master zone changes, address TSIG|NOKEY
	# IP can be ipv4 and ipv6, with @port for a nondefault port number.
	#notify: 192.0.2.1 NOKEY
	# allow these IPs and TSIG to transfer zones, addr TSIG|NOKEY|BLOCKED
	# address range 192.0.2.0/24, 1.2.3.4&255.255.0.0, 3.0.2.20-3.0.2.40
	#provide-xfr: 192.0.2.0/24 my_tsig_key_name
	# set the number of retries for notify.
	#notify-retry: 5

	# uncomment to provide AXFR to all the world
	# provide-xfr: 0.0.0.0/0 NOKEY
	# provide-xfr: ::0/0 NOKEY

	# A slave zone needs allow-notify: and request-xfr: lists.
	#allow-notify: 2001:db8::0/64 my_tsig_key_name
	# By default, a slave will request a zone transfer with IXFR/TCP.
	# If you want to make use of IXFR/UDP use: UDP addr tsigkey
	# for a master that only speaks AXFR (like NSD) use AXFR addr tsigkey
	#request-xfr: 192.0.2.2 the_tsig_key_name
	# Attention: You cannot use UDP and AXFR together. AXFR is always over 
	# TCP. If you use UDP, we higly recommend you to deploy TSIG.
	# Allow AXFR fallback if the master does not support IXFR. Default
	# is yes.
	#allow-axfr-fallback: yes
	# set local interface for sending zone transfer requests.
	# default is let the OS choose.
	#outgoing-interface: 10.0.0.10
	# limit the refresh and retry interval in seconds.
	#max-refresh-time: 2419200
	#min-refresh-time: 0
	#max-retry-time: 1209600
	#min-retry-time: 0
	# Slave server tries zone transfer to all masters and picks highest
	# zone version available, for when masters have different versions.
	#multi-master-check: no

	# limit the zone transfer size (in bytes), stops very large transfers
	# 0 is no limits enforced.
	# size-limit-xfr: 0

	# if compiled with --enable-zone-stats, give name of stat block for
	# this zone (or group of zones).  Output from nsd-control stats.
	# zonestats: "%s"

	# if you give another pattern name here, at this point the settings
	# from that pattern are inserted into this one (as if it were a 
	# macro).  The statement can be given in between other statements,
	# because the order of access control elements can make a difference
	# (which master to request from first, which slave to notify first).
	#include-pattern: "common-masters"


# Fixed zone entries.  Here you can config zones that cannot be deleted.
# Zones that are dynamically added and deleted are put in the zonelist file.
#
# zone:
 	# name: "example.com"
 	# you can give a pattern here, all the settings from that pattern
 	# are then inserted at this point
 	# include-pattern: "master"
 	# You can also specify (additional) options directly for this zone.
 	# zonefile: "example.com.zone"
 	# request-xfr: 192.0.2.1 example.com.key

	# RRLconfig
	# Response Rate Limiting, whitelist types
	# rrl-whitelist: nxdomain
	# rrl-whitelist: error
	# rrl-whitelist: referral
	# rrl-whitelist: any
	# rrl-whitelist: rrsig
	# rrl-whitelist: wildcard
	# rrl-whitelist: nodata
	# rrl-whitelist: dnskey
	# rrl-whitelist: positive
	# rrl-whitelist: all
	# RRLend

